Air intake and MAF/MAP
Mass air flow, manifold pressure and intake air temperature sensing, the correlation checks between them, and the intake runner controls.
20 documented codes across 106 real diagnostics.
Ranked by how often we actually see them
| Code | What it is | Diagnostics |
|---|---|---|
| P0101 | Mass or volume air flow circuit range/performance | 18 |
| P0100 | Mass or volume air flow circuit | 12 |
| P0102 | Mass or volume air flow circuit low input | 12 |
| P2015 | Intake manifold runner position sensor circuit range/performance, bank 1 | 10 |
| P2009 | Intake manifold runner control circuit low, bank 1 | 9 |
| P0113 | Intake air temperature sensor 1 circuit high | 8 |
| P2004 | Intake manifold runner control stuck open, bank 1 | 5 |
| P0103 | Mass or volume air flow circuit high input | 5 |
| P0110 | Intake air temperature sensor 1 circuit | 4 |
| P0069 | MAP to barometric pressure correlation | 3 |
| P0111 | Intake air temperature sensor 1 circuit range/performance | 3 |
| P0068 | MAP/MAF to throttle position correlation | 3 |
| P006A | MAP to mass air flow correlation | 3 |
| P2006 | Not individually documented | 3 |
| P2008 | Intake manifold runner control circuit open, bank 1 | 2 |
| P010B | Not individually documented | 2 |
| P0105 | Manifold absolute pressure / barometric pressure circuit | 1 |
| P2012 | Intake manifold runner control circuit low, bank 2 | 1 |
| P0106 | Manifold absolute pressure circuit range/performance | 1 |
| P2016 | Intake manifold runner position sensor circuit low, bank 1 | 1 |
Real cases
Real air intake and maf/map cases
Single diagnoses with a code from this group, written up: the car, the codes, the causes ranked and what to check first.
-
Diagnosing P0113 on the Audi A4 Allroad 3.0 TDI
-
Volvo V70 II Flashing Engine Light: Diagnosing Codes P2009 and P04D900
-
Diagnosing a Sudden Stall and P3044 on a 2009 Audi Q5
-
Diagnosing P2008 on a 2006 Toyota Avensis II
-
Diagnosing Stacked Intake and Exhaust Codes on a 2018 Audi A6
-
Diagnosing P0102 and Unexpected EVAP Symptoms on a MINI Clubman
FAQ
Frequently asked questions
How do I run a diagnosis?
Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.
Do I have to type the codes from my scan tool?
No. Click the camera button next to Error codes and take or choose a photo of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.
Are the public fault code pages built from my diagnostics?
They use diagnostics run in WrenchLane, with no workshop, customer, registration number or VIN shown. Each fault code page shows how often the code was seen and in how many workshops.
Work a air intake and maf/map fault on a real car
Enter the codes and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them.