Fuel pressure and delivery
Rail pressure, high-pressure pump, regulator and metering valve. P0087 (rail pressure too low) shows up with five different failure type bytes, which is the FTB doing real work.
23 documented codes across 114 real diagnostics.
Ranked by how often we actually see them
| Code | What it is | Diagnostics |
|---|---|---|
| P0087 | Fuel rail/system pressure too low | 20 |
| P0090 | Fuel pressure regulator 1 control circuit | 14 |
| P0193 | Fuel rail pressure sensor circuit high | 13 |
| P0001 | Fuel volume regulator control circuit open | 10 |
| P0089 | Fuel pressure regulator 1 performance | 5 |
| P008A | Low pressure fuel system pressure too low | 5 |
| P0252 | Injection pump fuel metering control A range/performance | 5 |
| P0190 | Fuel rail pressure sensor circuit | 5 |
| P0093 | Fuel system leak detected, large leak | 4 |
| P0002 | Fuel volume regulator control circuit range/performance | 4 |
| P02FA | Not individually documented | 4 |
| P0088 | Fuel rail/system pressure too high | 3 |
| P0003 | Fuel volume regulator control circuit low | 3 |
| P000A | A camshaft position slow response, bank 1 | 3 |
| P02ED | Not individually documented | 3 |
| P0095 | Intake air temperature sensor 2 circuit | 2 |
| P0148 | Fuel delivery error | 2 |
| P000B | B camshaft position slow response, bank 1 | 2 |
| P0191 | Fuel rail pressure sensor circuit range/performance | 2 |
| P0192 | Fuel rail pressure sensor circuit low | 2 |
| P0008 | Engine position system performance, bank 1 | 1 |
| P000F | Fuel system over-pressure relief valve activated | 1 |
| P0230 | Fuel pump primary circuit | 1 |
Real cases
Real fuel pressure and delivery cases
Single diagnoses with a code from this group, written up: the car, the codes, the causes ranked and what to check first.
-
2021 VW Caddy P0087: Diagnosing High-Pressure Fuel Stalls
-
Diagnosing P000B Exhaust Camshaft Slow Response on a 2020 MG HS
-
Peugeot 508 Hybrid4: Diagnosing Intermittent Starts
-
Diagnosing P0191 and P0193 on a Volvo V50
-
Diagnosing P0090 on the Nissan 1.2 DIG-T: Solenoid vs Harness
-
Diagnosing Power Loss on a 2016 Transit Custom
FAQ
Frequently asked questions
How do I run a diagnosis?
Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.
Do I have to type the codes from my scan tool?
No. Click the camera button next to Error codes and take or choose a photo of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.
Are the public fault code pages built from my diagnostics?
They use diagnostics run in WrenchLane, with no workshop, customer, registration number or VIN shown. Each fault code page shows how often the code was seen and in how many workshops.
Work a fuel pressure and delivery fault on a real car
Enter the codes and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them.