P0100: Mass or volume air flow circuit
What the code tells you on its own
- System
- Powertrain
- Functional group
- Air intake and MAF/MAP
- Subsystem
- Fuel and air metering
Engine, fuel, air, ignition, emissions and transmission. The overwhelming majority of what workshops bring to the AI.
Diagnostics
What we see when P0100 turns up
Measured across the diagnostics run through Wrenchlane, not taken from a reference table. Figures as of 2026-10-06.
- Diagnostics
- 12
- Separate workshops
- 11
- Arrived code only
- 58%
- Most common marque
- Ford
March 2026 to September 2026
Not one shop meeting it repeatedly
No symptom description entered at all
Where we have seen it most
These are counts from our own work, not a claim about how common the fault is across all vehicles. They describe what independent workshops brought to us, which is a narrower and more specific thing.
Our diagnosis data
What WrenchLane ranked first on P0100
Across 16 real diagnoses of P0100 from 16 workshops (February 2026 to November 2026), this is the cause WrenchLane ranked most likely for the code, grouped by the part it named. Most often: Mass air flow (MAF) sensor, in 88% of them.
Makes we see it on most: Ford 4 · Volvo 3 (of 16)
How to read this: these are the causes WrenchLane ranked first from the codes, the car and what the mechanic entered, not confirmed repairs. Each diagnosis is anonymised: no workshop, customer or number plate is used. Our own test accounts, the demo car and repeat runs of the same car are left out. We only publish a figure that rests on at least 10 diagnoses from at least 3 different workshops, with no single workshop above half of them; a code listed alongside needs at least 3. It describes what independent workshops brought to us, not how common a fault is across all cars. Data as of 2026-11-17. How we use diagnosis data
Real cases
Real cases with P0100
Diagnoses of P0100 on real cars, written up: the car, the codes it came in with, the causes ranked and what to check first.
Air intake and MAF/MAP
Other air intake and maf/map codes
- P0101 Mass or volume air flow circuit range/performance
- P0102 Mass or volume air flow circuit low input
- P2015 Intake manifold runner position sensor circuit range/performance, bank 1
- P2009 Intake manifold runner control circuit low, bank 1
- P0113 Intake air temperature sensor 1 circuit high
- P2004 Intake manifold runner control stuck open, bank 1
- P0103 Mass or volume air flow circuit high input
- P0110 Intake air temperature sensor 1 circuit
FAQ
Frequently asked questions
How do I run a diagnosis?
Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.
Do I have to type the codes from my scan tool?
No. Click the camera button next to Error codes and take or choose a photo of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.
Are the public fault code pages built from my diagnostics?
They use diagnostics run in WrenchLane, with no workshop, customer, registration number or VIN shown. Each fault code page shows how often the code was seen and in how many workshops.
Run P0100 against the car in front of you
Enter the code and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them.