Transmission

Gearbox control, solenoids, clutch and torque converter. P0700 is only a pointer — it says the transmission controller has its own stored code.

37 documented codes across 80 real diagnostics.

Ranked by how often we actually see them

Code What it is Diagnostics
P0700 Transmission control system, MIL request 7
P0751 Shift solenoid A performance or stuck off 6
P0743 Torque converter clutch circuit electrical 4
P0715 Input or turbine speed sensor A circuit 3
P0830 Clutch pedal switch A circuit 3
P0741 Torque converter clutch circuit performance or stuck off 3
P0720 Output speed sensor circuit 3
P0868 Transmission fluid pressure low 3
P073E Not individually documented 3
P07E4 Not individually documented 3
P0808 Not individually documented 3
P2762 Torque converter clutch pressure control solenoid circuit range/performance 2
P2711 Unexpected mechanical gear disengagement 2
P0703 Brake switch B circuit 2
P0725 Engine speed input circuit 2
P0760 Shift solenoid C 2
P0807 Clutch position sensor circuit low 2
P0722 Not individually documented 2
P0894 Not individually documented 2
P0931 Not individually documented 2
P0867 Not individually documented 2
P2757 Not individually documented 2
P0825 Not individually documented 2
P0737 Not individually documented 2
P0702 Transmission control system electrical 1
P0740 Torque converter clutch circuit open 1
P0766 Shift solenoid D performance or stuck off 1
P0750 Shift solenoid A 1
P0809 Clutch position sensor circuit intermittent 1
P0810 Clutch position control error 1
P0833 Clutch pedal switch B circuit 1
P0841 Transmission fluid pressure sensor A circuit range/performance 1
P0850 Park or neutral switch input circuit 1
P0856 Traction control input signal 1
P0883 TCM power input signal high 1
P2763 Torque converter clutch pressure control solenoid circuit high 1
P2764 Torque converter clutch pressure control solenoid circuit low 1

FAQ

Frequently asked questions

How do I run a diagnosis?

Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.

Copy link
Do I have to type the codes from my scan tool?

No. Click the camera button next to Error codes and take or choose a photo of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.

Copy link
Are the public fault code pages built from my diagnostics?

They use diagnostics run in WrenchLane, with no workshop, customer, registration number or VIN shown. Each fault code page shows how often the code was seen and in how many workshops.

Copy link

Work a transmission fault on a real car

Enter the codes and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them.