Misfire

Random or cylinder-specific combustion failure. The general code (P0300) plus a cylinder code (P0301-P0312) in the same session usually means one cylinder is dragging the whole engine.

8 documented codes across 108 real diagnostics.

Ranked by how often we actually see them

Code What it is Diagnostics
P0300 Random or multiple cylinder misfire detected 44
P0303 Cylinder 3 misfire detected 22
P0301 Cylinder 1 misfire detected 22
P0302 Cylinder 2 misfire detected 12
P0304 Cylinder 4 misfire detected 4
P0305 Cylinder 5 misfire detected 2
P0313 Misfire detected with low fuel 1
P0306 Cylinder 6 misfire detected 1

FAQ

Frequently asked questions

How do I run a diagnosis?

Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.

Copy link
Do I have to type the codes from my scan tool?

No. Click the camera button next to Error codes and take or choose a photo of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.

Copy link
Are the public fault code pages built from my diagnostics?

They use diagnostics run in WrenchLane, with no workshop, customer, registration number or VIN shown. Each fault code page shows how often the code was seen and in how many workshops.

Copy link

Work a misfire fault on a real car

Enter the codes and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them.