Land Rover fault codes
62 distinct codes across 58 real diagnostics on Land Rover, including the Land Rover-specific ones no generic code list can decode.
Our diagnosis data
Land Rover in our diagnoses
31 real diagnoses of a Land Rover with at least one standard code, from 16 workshops (February 2026 to November 2026). Which codes came in most, and which cause WrenchLane ranked first.
Standard codes on Land Rover, share of these diagnoses
Ranked first on Land Rover, by part
These are the causes WrenchLane ranked first, not confirmed repairs, and they describe what independent workshops brought to us, not how reliable Land Rover is. Anonymised; our test accounts, the demo car and repeat runs are left out. A figure needs at least 10 diagnoses from 3 or more workshops, a listed code at least 3. Data as of 2026-11-17. How we use diagnosis data
Land Rover-specific codes
These are manufacturer-specific, which means the same code on another marque is a different fault. That is exactly why they have no page of their own here and no entry in any generic code list: a single description for one of these would be wrong more often than right. Below they are scoped to Land Rover, ranked by how often we have actually seen them, which is a claim we can stand behind.
| Code | Diagnostics on Land Rover |
|---|---|
| U3006 | 3 |
| C1001 | 2 |
| C1A07 | 2 |
| P1103 | 2 |
| P115B | 2 |
| P1889 | 2 |
| B103D | 1 |
| B1412 | 1 |
| B153E | 1 |
| B1974 | 1 |
| B1B57 | 1 |
| B1B58 | 1 |
| P115A | 1 |
| P12BE | 1 |
| P1707 | 1 |
| P3038 | 1 |
| U3000 | 1 |
| U3001 | 1 |
To turn one of these into a cause you need the marque, the model and the engine, which is what the tool does. A code on its own is a starting point, not an answer.
Standard codes we see most on Land Rover
These are standardised, so they mean the same thing on every vehicle and each one has a page of its own. The counts are what we see on Land Rover specifically.
| Code | What it is | On Land Rover |
|---|---|---|
| P0102 | Mass or volume air flow circuit low input | 9 |
| P0193 | Fuel rail pressure sensor circuit high | 9 |
| P0234 | Turbocharger overboost condition | 4 |
| P0A95 | Not individually documented | 3 |
| P2002 | Diesel particulate filter efficiency below threshold, bank 1 | 3 |
| P2BAE | Not individually documented | 3 |
| U0064 | Not individually documented | 3 |
| P023D | Not individually documented | 2 |
| P0299 | Turbocharger underboost condition | 2 |
| P049B | Not individually documented | 2 |
| P0A0F | Engine failed to start | 2 |
| P203B | Not individually documented | 2 |
| P245A | Not individually documented | 2 |
| P2BAF | Not individually documented | 2 |
| U0001 | High speed CAN communication bus | 2 |
| P0040 | O2 sensor signals swapped, bank 1 sensor 1 / bank 2 sensor 1 | 1 |
| P0049 | Turbocharger turbine overspeed | 1 |
| P0341 | Camshaft position sensor A circuit range/performance, bank 1 | 1 |
| P0560 | System voltage | 1 |
| P0657 | Actuator supply voltage A circuit open | 1 |
| P0671 | Cylinder 1 glow plug circuit | 1 |
| P0700 | Transmission control system, MIL request | 1 |
| P242B | Not individually documented | 1 |
| P2453 | Diesel particulate filter pressure sensor A circuit range/performance | 1 |
| P24C7 | Not individually documented | 1 |
| P2763 | Torque converter clutch pressure control solenoid circuit high | 1 |
| P2764 | Torque converter clutch pressure control solenoid circuit low | 1 |
| P2BA9 | Not individually documented | 1 |
| U0106 | Lost communication with glow plug control module | 1 |
| U0241 | Not individually documented | 1 |
| U0400 | Invalid data received | 1 |
| U2100 | Not individually documented | 1 |
What tends to go wrong on Land Rover
By share of the codes we have seen on this marque. A description of our own caseload, not a reliability ranking.
- Bus communication · 18
- Powertrain, manufacturer-specific · 10
- Not yet classified · 9
- Air intake and MAF/MAP · 9
- Fuel pressure and delivery · 9
- Turbo and boost control · 8
Real cases
Real Land Rover cases
Single diagnoses on this make, written up: the car, the codes, the causes ranked and what to check first.
FAQ
Frequently asked questions
How do I run a diagnosis?
Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.
Do I have to type the codes from my scan tool?
No. Click the camera button next to Error codes and take or choose a photo of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.
Are the public fault code pages built from my diagnostics?
They use diagnostics run in WrenchLane, with no workshop, customer, registration number or VIN shown. Each fault code page shows how often the code was seen and in how many workshops.
Decode a Land Rover code against the actual car
Enter the code, the model and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them.