P0751: Shift solenoid A performance or stuck off
What the code tells you on its own
- System
- Powertrain
- Functional group
- Transmission
- Subsystem
- Transmission and drivetrain
Engine, fuel, air, ignition, emissions and transmission. The overwhelming majority of what workshops bring to the AI.
What we see when P0751 turns up
Measured across the diagnostics run through Wrenchlane, not taken from a reference table. Figures as of 2026-10-06.
- Diagnostics
- 6
- Separate workshops
- 1
- Arrived code only
- 0%
- Most common marque
- Chevrolet
May 2026
Seen at a single shop so far
No symptom description entered at all
Where we have seen it most
These are counts from our own work, not a claim about how common the fault is across all vehicles. They describe what independent workshops brought to us, which is a narrower and more specific thing.
What P0751 usually turns up with
Measured across our own diagnostics. The multiplier is how much more often the two appear together than chance would predict, so a high number means the pair is telling you something a single code is not. Codes rarely arrive alone, and reading the set is usually faster than chasing the first one on the list.
Run P0751 against the car in front of you
Enter the code and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them. Free account, no card.
Start freeOther transmission codes
- P0700 Transmission control system, MIL request
- P0715 Input or turbine speed sensor A circuit
- P0830 Clutch pedal switch A circuit
- P0741 Torque converter clutch circuit performance or stuck off
- P0743 Torque converter clutch circuit electrical
- P2762 Torque converter clutch pressure control solenoid circuit range/performance
- P0720 Output speed sensor circuit
- P2711 Unexpected mechanical gear disengagement
FAQ
Frequently asked questions
How do I run a diagnosis?
Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.
Learn more: Diagnostic (vehicle-first start), Diagnostic form: description, error codes and mileage
Do I have to type the codes from my scan tool?
No. Click the camera button next to Error codes and take or choose a photo (JPEG or PNG) of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.
Learn more: OBD reader photo scan (fault codes from a photo), Voice input for the problem description
Are the public fault code pages built from my diagnostics?
They are built from anonymised, aggregated diagnostics run in WrenchLane; no workshop, customer or vehicle can be identified. Each fault code page shows how often the code was seen across those diagnostics and in how many separate workshops.
Learn more: Fault code pages on wrenchlane.com (fault-code cluster)