Valve timing and camshaft
Camshaft/crankshaft correlation, VVT actuators and oil control valves, cam and crank sensors. P0016/P0017 correlation codes are the stretched-timing-chain family.
17 documented codes across 124 real diagnostics.
Ranked by how often we actually see them
| Code | What it is | Diagnostics |
|---|---|---|
| P0011 | A camshaft position timing over-advanced or system performance, bank 1 | 24 |
| P0017 | Crankshaft/camshaft position correlation, bank 1 sensor B | 22 |
| P0016 | Crankshaft/camshaft position correlation, bank 1 sensor A | 13 |
| P0340 | Camshaft position sensor A circuit, bank 1 | 10 |
| P0341 | Camshaft position sensor A circuit range/performance, bank 1 | 10 |
| P0014 | B camshaft position timing over-advanced or system performance, bank 1 | 10 |
| P0335 | Crankshaft position sensor A circuit | 9 |
| P0012 | A camshaft position timing over-retarded, bank 1 | 7 |
| P0343 | Camshaft position sensor A circuit high, bank 1 | 4 |
| P0019 | Crankshaft/camshaft position correlation, bank 2 sensor B | 3 |
| P0013 | B camshaft position actuator circuit, bank 1 | 3 |
| P0020 | A camshaft position actuator circuit, bank 2 | 2 |
| P0336 | Crankshaft position sensor A circuit range/performance | 2 |
| P0010 | A camshaft position actuator circuit, bank 1 | 2 |
| P0344 | Camshaft position sensor A circuit intermittent, bank 1 | 1 |
| P0345 | Camshaft position sensor A circuit, bank 2 | 1 |
| P0366 | Camshaft position sensor B circuit range/performance, bank 1 | 1 |
Real cases
Real valve timing and camshaft cases
Single diagnoses with a code from this group, written up: the car, the codes, the causes ranked and what to check first.
-
Diagnosing P034062 and Extended Cranking on a 2009 Mercedes-Benz E Coupe
-
Diagnosing a P0017 Code on a 2016 SsangYong Tivoli
-
Diagnosing a Warm Restart P0012 on a 2011 SMART Fortwo
-
Diagnosing U013C00, P039100 and P036600 on a 2019 Audi Q7
-
Diagnosing P0011 and P0300 on a 2025 Audi A5
-
Diagnosing P0012 and Severe Lag on a 2015 BMW X5
FAQ
Frequently asked questions
How do I run a diagnosis?
Select the vehicle on Start, click the Diagnostic card and choose New diagnostic. Fill in the description, the error codes and the mileage, then click Analyze.
Do I have to type the codes from my scan tool?
No. Click the camera button next to Error codes and take or choose a photo of the scan tool's screen; WrenchLane reads the codes and their descriptions into the form. You can also speak them with the microphone.
Are the public fault code pages built from my diagnostics?
They use diagnostics run in WrenchLane, with no workshop, customer, registration number or VIN shown. Each fault code page shows how often the code was seen and in how many workshops.
Work a valve timing and camshaft fault on a real car
Enter the codes and the symptoms and get ranked probable causes for that specific vehicle, with the checks in the order worth doing them.